Solarhome New Brake Booster Pump Assembly 47070-33030 Compatible With EQ EV KPJ10 Prius RAV4 HS250H 2010-15

Application Models: Compatible With EQ EV KPJ10 Prius RAV4 HS250H 2010-15 Notice: The oil inlet pipe and the oil outlet pipe must NOT be inserted at the same time. Fill the inlet port with brake fluid until theoutlet port overflow before you install it toyour car, which will help to squeeze air outand will be easier to build pressure. Installation instructions: 1.Before installation, please carefully check whether the model, specification, performance parameters and applicable models of the product meet the requirements of your system. 2.Before installation, clean the oil storage tank and pipeline system to ensure that the pipeline is unblocked. If the brake fluid has been used for a long time and has impurities, please replace it before installation. 3.Check connection ports of ABS pump are not blocked by dirt. 4.Pay attention to distinguish the fluid inlet and outlet of the product. The pipeline connecting the fluid inlet and outlet shall not be too thin, too long or too many elbows, which will cause too much resistance to make the fluid suction or discharge impeded, resulting in insufficient pressure, flow or noise. 5.The wire ends shall be connected in the correct direction and fastened to prevent poor contact; 6.If it is necessary to install the accumulator, please install the matching sealing ring at the connection port of the accumulator, otherwise it will produce leakage or air intake and generate noise.

• Application Models: Compatible With EQ EV KPJ10 Prius RAV4 HS250H 2010-15
• Notice: The oil inlet pipe and the oil outlet pipe must NOT be inserted at the same time. Fill the inlet port with brake fluid until theoutlet port overflow before you install it toyour car, which will help to squeeze air outand will be easier to build pressure.
• Installation instructions:
• 1.Before installation, please carefully check whether the model, specification, performance parameters and applicable models of the product meet the requirements of your system.
• 2.Before installation, clean the oil storage tank and pipeline system to ensure that the pipeline is unblocked. If the brake fluid has been used for a long time and has impurities, please replace it before installation.
• 3.Check connection ports of ABS pump are not blocked by dirt.
• 4.Pay attention to distinguish the fluid inlet and outlet of the product. The pipeline connecting the fluid inlet and outlet shall not be too thin, too long or too many elbows, which will cause too much resistance to make the fluid suction or discharge impeded, resulting in insufficient pressure, flow or noise.
• 5.The wire ends shall be connected in the correct direction and fastened to prevent poor contact;
• 6.If it is necessary to install the accumulator, please install the matching sealing ring at the connection port of the accumulator, otherwise it will produce leakage or air intake and generate noise.